Aperon Audo MK Planar-Magnetc Flat Rbbon Super Tweeter Speaker

This is a special tweeter which adds a subtle boost to the upper register frequencies. But, you can also use them with center channel speakers and surround speakers. Aperion Super Tweeter is generally intended to respond well into ultra-high frequencies over 20 kHz, the commonly accepted upper frequency limit of human hearing. The OFF position renders the Super Tweeter inert. A linear phase response provides time coherent sound reproduction, allowing for an accurate sound stage. They add a subtle touch to the high frequency range and blend seamlessly with many brands of speakers. How much will the Super Tweeter change the treble response? Answer: The crossover setting will have the most effect on the treble sound. Aperion Audio PST Planar-Magnetic Ribbon Super Tweeter Speaker Pair MKII This Super Tweeter is a planar-magnetic, flat-ribbon tweeter consisting of Kapton film with a pattern of aluminum conductors. If you have any questions, please contact the customer service team at Aperion Audio. Features Extended High Frequency Flat-Ribbon Tweeter This is not your normal tweeter. They are used to supplement the sound of tweeters by reproducing frequencies which the existing tweeter may produce only with a narrow polar output, or perhaps with distortion. Treble Adjust Knob Too much of a good things? Use the treble adjust to reduce the output of the Super Tweeter. Please do not expect this tweeter to be extremely loud. DST AMT Ribbon Super Tweeter: can be suitably matched with any speaker whose sensitivity is between 85-96 dB. I bought these super-tweeters in January 2022 to extend the high-frequency response of my existing loudspeakers full-range drivers, which is over 20 kHz, the commonly accepted upper frequency limit of human hearing. They have never been used and only rece Since the Super Tweeter will most likely be sharing the binding posts with your amplifier connection, using wire with spade or ring connections will allow both sets of wires to easily connect to the same binding posts. Easy Connection The Super Tweeter shares the same binding posts as the speaker you're pairing it with. Graph showing the extended frequency response of our Super Tweeter on the 14 kHz and 16 kHz settings when paired with a bookshelf speaker: Aperion Super Tweeter Sensitivity Ranges: PST Planar Ribbon Super Tweeter: Can be suitably matched with any speaker whose sensitivity is between 85-94 dB RST Aluminum Ribbon SuperTweeter can be suitably matched with any speaker whose sensitivity is between 85-96 dB. Unlike a horn tweeter, the Super Tweeter delicately handles high frequencies, bringing a new dynamic to your sound field. Customer`s Pictures FAQ What kind of speakers will the Super Tweeter work with? Answer: Most passive bookshelf or tower speakers are great candidates for the Super Tweeter. PST Super Tweeter Stealth Black Specification Frequency Response: 8 Khz-40 Khz Impedance: 6 Ohms Sensitivity: 94 dB Crossover Points: 8K, 10K, 12K, 14K, 16K & off Treble Adjust: 0,-1dB,-2dB,-3dB,-4dB,-5dB Crossover Slope: 12 dB/octave Recommended Power: 10-100 Watts Direct Power Handling: 20 Watts Tweeter: APERION Planar-magnetic Flat Ribbon Tweeter Product Weight: 1.65 lbs/0.75 Kg per each Product Dimensions: 5.27 x 4 x 5 / 134 x 102 x 127 (HxWxD) Placement Location: Add on top of speakers Shipping Weight: 4.5 lbs/ 2 Kg per pair Shipping Dimensions: 7 x 12 x 8/180 x 302 x 206mm (LxWxH) If your regular speaker doesn’t produce frequencies above 14 kHz very well, then that would be a good starting point for your crossover. However, the we've received feedback that the Super Tweeter works great with Bose 901's, Quad Electrostatic 2805, and other full range and electrostatic speakers. Will the Super Tweeter work with my electrostatic, full range, or professional audio speakers? Answer: We advise you to check the sensitivity level and frequency response of your current speakers. What’s the highest frequency the Super Tweeter will reach? Answer: The Aperion Audio Super Tweeter can reach up to 35 kHz. How do I connect the Super Tweeter speaker to my passive speakers? Answer: The Super Tweeter connects directly to the binding posts on the speaker you are pairing it with (not to the amplifier!). A Super Tweeter specializes in ultra-high frequencies and is used in conjunction with a bookshelf or tower speaker. Super Tweeters are ideal for taking advantage extended-range audio formats such as vinyl, SACD, FLAC, UHD Bluray and other high-fidelity products. What is a Super Tweeter speaker? Put simply, it’s an additional tweeter unit which covers a wide and extended high-frequency response, beyond that of your existing loudspeaker’s integrated tweeters. The crossover slope is 12 dB/octave. The lowest setting, 8 kHz, will provide the most overlap with your existing tweeter while the highest setting, 16 kHz, will have minimal overlap, picking up at the top-end of the range. Just flip the switch and adjust to taste, up to -5dB. This parallel connection allows the Super Tweeter to feed off the same signal as your main speaker. Home Tweeters Aperon Audo MK Planar-Magnetc Flat Rbbon Super Tweeter Speaker Ds18 Tweeter